TORN WOUND (L) Large - PROSTHETIC FX FLAT MOULD in the effect of an open, torn wound approximately 2.8 cm long. A reusable silicone mold made from Platsil Gel 25 with Hi-Ro Slip additive.
TORN WOUND (L) Large - PROSTHETIC FX FLAT MOULD in the effect of an open, torn wound approximately 2.8 cm long. A reusable silicone mold made from Platsil Gel 25 with Hi-Ro Slip additive.
Ready to use, silicone mold for casting with Bondo, Probondo, P.T.M. Prosthetic Transfer Material, and silicones.
The mold is made from PlatSil® Gel-25 - a two-part, platinum-catalyzed liquid silicone system with Hi-Ro Slip - Silicone Mold Release Additive. The anti-adhesive additive used in the mold is designed for the self-release of prosthetic transfers, making it easier to separate them from the mold and reducing the risk of damaging thin and delicate transfer elements.
Application of Bondo, Probondo, P.T.M. Prosthetic Transfer Material: Use a thin layer of DAB Molding Release separator before filling the mold - Curing and setting time according to the specifications of the product used.
Application of Baldiez, SuperBaldiez, PlatSil® Gel-25 silicone with PlatSil® Deadener LV additive: use spray separator - Curing and setting time according to the specifications of the product used.
After each use, clean the mold of any leftover products and store it at room temperature. Avoid very low temperatures that may excessively activate the Hi-Ro Slip anti-adhesive additive. Freezing the mold is only recommended during the curing of P.T.M. Prosthetic Transfer Material.
Note! The color of the mold may differ from the color presented in the reference photo. Changing the color of the mold does not affect the parameters of the product, particularly the casting.
You might also like
