SMALL CUT WOUND 2 (NEW) - PROSTHETIC FX FLAT MOULD with the effect of a cut wound approximately 1.8 cm long. A reusable silicone mold made of Platsil Gel 25 with the addition of Hi-Ro Slip.
Ready to use, silicone mold for casting Bondo, Probondo, P.T.M. Prosthetic Transfer Material, and silicones.
The mold is made of PlatSil® Gel-25 - a two-part, platinum-catalyzed liquid silicone system with the addition of Hi-Ro Slip - Silicone Mold Release Additive. The anti-adhesive additive used in the mold is intended for the automatic release of prosthetic transfers, facilitating their separation from the mold and reducing the possibility of damaging thin and delicate transfer elements.
Application of Bondo, Probondo, P.T.M. Prosthetic Transfer Material: Use a thin layer of DAB Molding Release separator before filling the mold - Curing and setting time in accordance with the specifications of the product used.
Application of Baldiez, SuperBaldiez, PlatSil® Gel-25 silicone with added PlatSil® Deadener LV: use a spray separator - Curing and setting time in accordance with the specifications of the product used.
After each use, clean the mold of product residues and store at room temperature. Avoid very low temperatures that may excessively activate the Hi-Ro Slip anti-adhesive additive. Freezing the mold is indicated only during the curing of the P.T.M. Prosthetic Transfer Material.
Note! The color of the mold may differ from the color shown in the reference photo. The color change of the mold does not affect the product parameters, particularly the casting.
You might also like
