DOUBLE SCAR SMALL - PROSTHETIC FX FLAT MOULD with the effect of a healed complex, raised scar approximately 3.1 cm long. A reusable silicone mold made of Platsil FS 20 with added Hi-Ro Slip.
DOUBLE SCAR SMALL - PROSTHETIC FX FLAT MOULD with the effect of a healed complex, raised scar approximately 3.1 cm long. A reusable silicone mold made of Platsil FS 20 with added Hi-Ro Slip.
Ready to use, silicone mold for casting with Bondo, Probondo, P.T.M. Prosthetic Transfer Material, and silicones.
The mold is made of PlatSil® Gel-25 - a two-part, platinum-catalyzed liquid silicone system with added Hi-Ro Slip - Silicone Mold Release Additive. The anti-adhesive additive used in the mold serves for the automatic release of prosthetic transfers, facilitating their separation from the mold and reducing the risk of damage to thin and delicate transfer elements.
Application of Bondo, Probondo, P.T.M. Prosthetic Transfer Material: Use a thin layer of DAB Molding Release separator before filling the mold - Curing and setting time according to the specifications of the product used.
Application of Baldiez, SuperBaldiez, PlatSil® Gel-25 silicone with the addition of PlatSil® Deadener LV: use spray separator - Curing and setting time according to the specifications of the product used.
After each use, clean the mold from product residues and store at room temperature. Avoid very low temperatures that may overly activate the Hi-Ro Slip anti-adhesive additive. Freezing the mold is only recommended during the curing of the P.T.M. Prosthetic Transfer Material.
Note! The color of the mold may differ from the color shown in the reference photo. The change in the color of the mold does not affect the product parameters and, in particular, the cast.
You might also like
