• Reduced price
SINGLE SCAR - PROSTHETIC FX FLAT MOULD
SINGLE SCAR - PROSTHETIC FX FLAT MOULD
SINGLE SCAR - PROSTHETIC FX FLAT MOULD
SINGLE SCAR - PROSTHETIC FX FLAT MOULD
SINGLE SCAR - PROSTHETIC FX FLAT MOULD
SINGLE SCAR - PROSTHETIC FX FLAT MOULD

SINGLE SCAR - PROSTHETIC FX FLAT MOULD

€15.99
Tax included

SINGLE SCAR - PROSTHETIC FX FLAT MOULD in the form of a single, healed, raised scar approximately 4 cm long. Silicone mould for multiple use made from Platsil Gel 25 with Hi-Ro Slip additive.

Selected variant:

 

SINGLE SCAR - PROSTHETIC FX FLAT MOULD in the form of a single, healed, raised scar approximately 4 cm long. Silicone mould for multiple use made from Platsil Gel 25 with Hi-Ro Slip additive.

Ready to use, silicone mould for casting with Bondo, Probondo, P.T.M. Prosthetic Transfer Material, and silicones.

The mould is made from PlatSil® Gel-25 - a two-part, platinum-catalyzed liquid silicone system with Hi-Ro Slip - Silicone Mold Release Additive. The anti-adhesive additive used in the mould allows for the self-release of prosthetic transfers, making it easier to separate them from the mould and reducing the risk of damage to thin and delicate transfer elements.

Application of Bondo, Probondo, P.T.M. Prosthetic Transfer Material: Use a thin layer of DAB Molding Release separator before filling the mould - Curing and setting time in accordance with the specifications of the used product.

Application of Baldiez, SuperBaldiez, PlatSil® Gel-25 silicone with PlatSil® Deadener LV additive: use spray separator - Curing and setting time in accordance with the specifications of the used product.

After each use, clean the mould of any product residues and store it at room temperature. Avoid very low temperatures that may excessively activate the Hi-Ro Slip anti-adhesive additive. Freezing the mould is recommended only during the curing of P.T.M. Prosthetic Transfer Material.

Note! The color of the mould may differ from the color presented in the reference photograph. The change in the color of the mould does not affect the product's parameters and, in particular, the cast.

You might also like

16 other products in the same category:

Product added to wishlist