TORN WOUND (M) Medium - PROSTHETIC FX FLAT MOULD, with an effect of an open, torn wound approximately 2.9 cm long. A reusable silicone mold made from Platsil Gel 25 with Hi-Ro Slip additive.
TORN WOUND (M) Medium - PROSTHETIC FX FLAT MOULD, with an effect of an open, torn wound approximately 2.9 cm long. A reusable silicone mold made from Platsil Gel 25 with Hi-Ro Slip additive.
Ready to use, silicone mold for making casts with Bondo, Probondo, P.T.M. Prosthetic Transfer Material, and silicones.
The mold is made from PlatSil® Gel-25 - a two-part, platinum-catalyzed liquid silicone system with Hi-Ro Slip - Silicone Mold Release Additive. The anti-adhesive additive used in the mold helps to self-release prosthetic transfers, making it easier to separate them from the mold and reducing the possibility of damaging thin and delicate transfer elements.
Using Bondo, Probondo, P.T.M. Prosthetic Transfer Material: Use a thin layer of DAB Molding Release separator before filling the mold - Curing and setting time according to the specifications of the product used.
Using Baldiez, SuperBaldiez, PlatSil® Gel-25 silicone with PlatSil® Deadener LV additive: use a spray separator - Curing and setting time according to the specifications of the product used.
After each use, clean the mold of any residue and store at room temperature. Avoid very low temperatures that may excessively activate the Hi-Ro Slip anti-adhesive additive. Freezing the mold is advised only during the curing of P.T.M. Prosthetic Transfer Material.
Note! The color of the mold may differ from the color presented in the reference photo. The change in the color of the mold does not affect the product parameters and, in particular, the casting.
You might also like
